Product Price Quantity Delete

    Sensor

    Flow sensors SICK FFU

    Type:FFUC10-1N1IO
    Part No.:6058261
    Features
    Measurement principle Ultrasonic sensor
    Medium Fluids
    Nominal width measuring tube DN 10
    Process temperature 0 °C ... +80 °C
    Process pressure ≤ 16 bar


    Performance
    Minimim flow ≥ 0.3 l/min 1)
    Maximum flow 0 l/min ... 21 l/min
    Inlet zone 10 cm
    Output zone 0 cm
    Conductivity No limitation
    Measurement accuracy 1 % of reading ± 3 mm/s (with calibration report) 2)
    Repeatability ≤ 0.5 %
    Resolution 0.003 l/min
    • 1) At constant flow rate.
    • 2) Reference condition: Water, zero gas, measuring tube completely full, no cavitation, temperature of medium 20 °C, ambient temperature 20 °C ... 25 °C, compliance with inlet and outlet zones, warm-up time for electronics: 30 min.


    Electronics
    Supply voltage 18 V DC ... 30 V DC 1)
    Residual ripple ≤ 5 Vpp 2)
    Power consumption ≤ 180 mA 3)
    Initialization time ≤ 5 s
    Protection class III
    Connection type Round connector M12 x 1, 5-pin
    Output signal

    Analog output 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature 1)

    1 pulse/status output PNP/NPN-transistor output for flow rate meter, empty pipe detection, flow monitoring, dosing output, flow direction (dependent on type)

    Output current < 100 mA 4)
    Output load < 500 Ohm
    Lower signal level 3.8 mA ... 4 mA
    Upper signal level 20 mA ... 20.5 mA
    Impuls/frequency output 0 kHz ... 10 kHz
    Puls width ≤ 1 s
    Signal voltage HIGH Vs - 2 V
    Signal voltage LOW ≤ 2 V
    Inductive load 1 H
    Capacitive load 100 nF
    Response time Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s 5)
    • 1) All connections are polarity protected. All outputs are overload and short-circuit protected.
    • 2) May not exceed or fall below Uv tolerances.
    • 3) Without load.
    • 4) There are 100 mA for each output PNP and NPN available.
    • 5) Analog output and display.


    Mechanics
    Process connection ½" NPT
    Wetted parts

    PPSU

    EPDM

    Housing material PPSU
    Enclosure rating IP67
    Weight 340 g


    Ambient data
    Ambient operating temperature 0 °C ... +60 °C
    Ambient temperature, storage –20 °C ... +70 °C


    Classifications
    ECl@ss 5.027200412
    ECl@ss 5.1.427200412
    ECl@ss 6.027200412
    ECl@ss 6.227200412
    ECl@ss 7.027200412
    ECl@ss 8.027200412
    ECl@ss 8.127200412
    ECl@ss 9.027200412
    ECl@ss 10.027200412
    ECl@ss 11.027200412
    ETIM 5.0EC002580
    ETIM 6.0EC002580
    ETIM 7.0EC002580
    ETIM 8.0EC002580
    UNSPSC 16.090141112501

    Verification

    Click the numbers in sequence.

    Leave a message

    Please leave us a message and we will get back to you shortly.


    Verification

    Click the numbers in sequence.